#Coppercube tono 2d overlay properties update
#Coppercube tono 2d overlay properties upgrade
#Coppercube tono 2d overlay properties password
#Coppercube tono 2d overlay properties Offline

Using the IP Settings feature, the user can select DHCP to assign an IP for the CopperCube.

#Coppercube tono 2d overlay properties Offline

However, if your device (CopperCube in this case) goes offline and reconnects to the network, it may not have the same IP address as it had before. The DHCP server keeps a record of all the addresses that have been assigned to the existing devices and ensures that these addresses do not conflict with each other. DHCP automatically assigns IP addresses and network parameters for the devices that are introduced into the network. The IP Settings feature gives the user the ability to select either Dynamic Host Configuration Protocol (DHCP) or Static IP as a means of network configuration.ĭHCP: Dynamic Host Configuration Protocol is an internet protocol that assigns unique IP addresses for devices on the network and then releases and renews these addresses as devices join and leave the network. The IP and network configuration for the CopperCube can be carried out using the IP Settings page of the UI. This port is configured with zero-config networking with an address of LAN2 is the service port or fixed IP port.LAN1 is the network port for connecting to the BACnet network and usually for the cube to have internet access.The CopperCube has two LAN configurations, these are: Note that, the IP Settings configuration is different from the CopperCube to BACnet connection configuration. Network configuration assigns an address to the CopperCube so that it can send and receive information. Once the CopperCube IP Settings are configured, the CopperCube can be accessed in the same manner as any other device on the IP network. IP Settings feature in the CopperCube User Interface (UI) allows the user to define how the CopperCube device connects to an IP network.

#Coppercube tono 2d overlay properties upgrade

In this section, you’re able to see the license information such as License type, Expiry date, Trend Log limit, SQL connector, and hardware signature.Īs well, you are able to upload your license file to the Cube here if you have decided to upgrade your license.

To do either action, simply click on the required button and confirm the pop-up message. The only way to power the Cube back up is by pressing a button on the device, therefore, it is not recommended that you shut down the cube unless you have physical access to it. The shutdown is the correct way to power down the cube. The cube will now automatically check for updates.Īs the CopperCube is a computer, simply unplugging the power is not recommended.Ī restart may be needed to recover from some transient errors and also to reinitialize network settings for external changes. Click Set Auto-Update Schedule to save changes.In the “Turn On Automatic Update” field, select the check box and enter when you would like the CopperCube to check for available updates.

#Coppercube tono 2d overlay properties update

You can also turn on the CopperCube automatic check-and-apply firmware update feature. You can check for and apply any available updates by clicking on Check now.

This section allows you to check and apply the CopperCube firmware updates. Selecting the logo image file from the file directory.

Clicking Browse in the Header Logo field.

The image that appears in the header frame of the CopperCube web interface header can be changed by:

Clicking Update Password to save changes.Ĭhanging the logo is useful to help identify the cubes, especially when then are multiple cubes on one site.

#Coppercube tono 2d overlay properties password

The password you use to log into the CopperCube web interface is changed by: Note: if you change the password there will be no way to recover it.

Select your preferred Network Time Protocol (NTP) server by entering the server’s site name or IP address.

Click the drop-down menu list of the “Select Time Zone” field and select the time zone for your site.

Note: the time server is IP-based and not BACnet-based. There are 2 settings that can be configured: Time zone and NTP time server. Note: access to the Basic Settings page is password protected. The basic settings section of the CopperCube allows you to configure the following fields:Īs well, the following actions can be taken: